Free
Shipping Within The Continental United States Only. We Ship
Specialty
Harley Tools, Almost Everywhere, It Just Costs A Little More!!!
<< Harley Tool Kits >>
<< Specialty
Harley Tools Pages
1 ,
2
, 3
, 4
,
5 >>
 |
"Jims" Wheel Bearing Tool For 2000-Later Harley
Davidson & Custom Wheel Bearings!! Pull Your Wheel Bearings, Or Install A New Set, Without Damaging The Bearings, Or The Wheel!! (Don't Try This At Home Without One!!) |
For Installing & Removing Sealed Ball Type
Wheel Bearings, On 2000-Later Harley Davidson & Customs!! Works With 3/4" & 1" I.D. Sealed Ball Type Wheel Bearings, Includes Instructions, Makes A Difficult (at best) Job, A Breese!! |
$254.00
Shipped To Your Door!! |
 |
 |
Valve Spring Compressor Specially Designed To Ease Head Work On Late Model Bikes!! |
Fits All Twin Cam 88 & Evolution Big Twin, & Sportster Engines!! |
$79.00
Shipped To Your Door!! |
|
 |
Jims Tools, Harley Valve Spring Compressor!! Features A Hardened Ball Bearing At The Valve Head End To Eliminate Damage To Valves!! |
Tool Designed For Harley Davidson Evolution Heads, But Works With ALL Big Twin & Evo Sportster Heads!! |
$159.00
Shipped To Your Door!! |
|
 |
Manley Piston Ring Grinder!! | Bench-Top, Manual Grinder, Works On Any Type, Or Size Piston Ring!! Allows For Grinding The End Gap For Oversize Rings To Proper Specs!! |
$169.00
Shipped To Your Door!! |
|
 |
Motor Mount Bolt Wrench Allows Easy Left Rear Motor Mount Removal Without Having To Disassemble Inner Primary!! |
Tool Fits Harley Davidson Big Twins 1948-1999! |
$65.00
Shipped To Your Door!! |
|
 |
Jims Tools, Harley Piston Pin Keeper Tool!! Makes Piston Pin Retaining Ring Installation A Snap!! Gotta Have The Right Tool, For The Right Job!! |
Fits Stock Piston Pin Retainers, Big Twin
1983-1999, & Sportster Models 1985-2003!! Does NOT Fit Twin Cam 88!! |
$109.00
Shipped To Your Door!! |
|
 |
Jims Piston Ring Compressor Tool!! Extra Fine Tooth Ratcheting Mechanism Will Compress Rings In Small Increments Without Breaking!! |
Includes 6 Bands, Ranging From 2 3/16 Inch, To 4 3/8 Inch!! |
$115.00
Shipped To Your Door!! |
|
 |
Jims Tools, Rocker Bushing Puller!! Removes Rocker Arm Bushings, Or Roller Bearings In One Easy Operation!! |
Tool For Harley Davidson Big Twins 1966 To Present & Sportster & Buell Models 1957-2003 |
$144.00
Shipped To Your Door!! |
|
 |
Jims Tools Rocker Bushing Reamer!! Precision Reamer Made From The Finest Heat-Treated Tool Steel!! Precision Alignment & Sizing Of Rocker Bushing!! |
Jims Harley Tool, Rocker Bushing Reamer Fits Harley Davidson Big Twins 1966-Present & Sportster 1957-2003!! |
$189.00
Shipped To Your Door!! |
|
 |
Rowe Valve Guide Installation Tool Set!! This Tool Pushes Intake & Exhaust Guides To The Correct Height While Assuring They Are Square To the Valve Seat!! |
Custom Harley Tool Set Is Designed For Use On
Evolution OR Pre-Evo Cylinder Heads!! Set Includes Valve Seat Centered Adapters, Precision-Machined Shoulder Guide & Assembly Lube!! |
$115.00
Shipped To Your Door!! Select Either A Evo, Or Pre-Evo Set In The Saddlebag!! |
|
 |
Trock Evolution Lapping Ring!! Laps 3 1/2 & 3 5/8 Inch Cylinders To Obtain A Flat Sealing Surface To Avoid Blowing gaskets!! |
Double Sided Lapping Ring!! Cuts Fast With Minimum Effort!! Complete With Instructions & Lapping Compound!! |
$119.00
Shipped To Your Door!! |
|
 |
Jims Tools, Wrist Pin Bushing Harley Tool Makes It Easy To Remove & Install Rod Bushings!! Complete Instructions!! |
Harley Tool Available For Twin Cam 88 from 1999 To Present, Or All Other Models 1999 & Below!! |
$109.00
Shipped To Your Door!! Select From Twin Cam 88, Or All Others In The Saddlebag!! |
|
 |
Jims Tools, Wrist Pin Remover Tool!! Too Simple, Too Slick, The Right Tool, For The Job!! |
Custom Jims Harley Tool Fits All Models!! |
$109.00
Shipped To Your Door!! |
|
<< Harley Tool Kits >> << Specialty Harley Tools Pages 1 , 2 , 3 , 4 , 5 >>
We Carry A Comprehensive Selection Of Specialty Harley Tools,!! Both Engine & Transmission Tools For Your Harley Davidson & Custom!! You have to have the right tool for the right job, for both fit & finish, and the best use of your time & efforts. Do not fight your tools, let them do the work for you!! If you are going to work on your own Harley & Custom, Then Pick Up Your Specialty Harley Tools To Do The Job Right And On Time,, The First Time!
Harley Davidson Disclaimer:
Harley Davidson, - Is A registered trademark of the Harley Davidson Motorcycle Company.
Any use of previous trademarks are purely for reference purposes and not
intended as copyright infringement, We Only Use These Terms To Describe What
These Custom, Aftermarket Harley Tools Fit & Are
Used For.
Copyright 2007
TTC - Custom
Motorcycle Parts