 |
Harley Davidson Daytona Sensors Diagnostic Scan Tool!!
This Low cost Harley Davidson Daytona Sensors Scan
Tool plugs directly into the wire harness JI850 Data Bus Connector.
Designed to read and clear diagnostic trouble codes from the Engine
Control Module (ECM), Instrument Module (IM) and the Turn Signal/Security
Modules (TSM/TSSM)
Requires a laptop computer with Pentium® (or equivalent) processor 300mhz
or better, Microsoft® Windows® 98/ME/XP, 1024 x 768 screen resolution, 9
pin D-sub connector and a CD Rom Drive!! |
Fits Fuel Injected Big Twin 2001/Later,
Carbureted Big Twin 2004/Later, V-Rod 2002/Later & Sportster 2004/Later !!
Free Software Upgrades, Unlike the more expensive Scan Tool available, the
Twin Scan 88 can be plugged into the motorcycle and test driven to help
diagnose intermittent or multiple problems. This unit can be set up to
store data for the last hour of operation and if a trouble code is set, it
will automatically stop logging data 30 minutes after a code is set!! |
$199.00 Shipped To Your Door!! |
 |
 |
Harley Davidson Chain & Belt Lazer Alignment Tool!!
Easy To Use!! Proper Alignment Will Extend The
Life Of Your Chain & Sprockets, OR Belt & Pulleys!! |
A Must Have For Proper Alignment Of Your Belt
Or Chain!! Includes
Batteries, Storage Bag & Instructions!! |
$116.00 Shipped To Your Door!! |
 |
 |
Harley Davidson Belt Tension Gauge!!
Easy To Use, Proper Tension Will Extend The Life Of
Your Belt!! |
A Must Have For Proper Tension Of Your Belt!!
Works With Harley Davidson Rear Belt
Models 1980 Up!! |
$44.00 Shipped To Your Door!! |
 |
 |
Harley Davidson Ignition Timing Tool For Big Twin &
Evo!!
Designed for Ignition Systems that have points or
electronic ignition with mechanical-type advance unit. Allows
timing light to be used on the right hand side of the motorcycle
Turns a two-man-job into a one-man-job. Shows exact amount of
advance in degrees and will show over advance if the advance unit is worn
out!! |
This Ignition Timing Tool Is For Use On Harley
Davidson Evo & Big Twins, 1970/1999 (Except EFI & Twin Cam Models)!!
Stainless steel construction,
Includes instructions and storage case!! |
$129.00 Shipped To Your Door!! |
 |
 |
Jims Tools Harley Davidson Twin Cam 88 Cam Bearing
Puller!! |
Specialty Harley Davidson Tools Fits Twin Cam
88 Models 1999-Present |
$169.00 Shipped To Your Door!! |
 |
 |
Jims Cam Tools!!
Big Twin Bearing Puller, And, Or Cam Bushing Reamer |
Specialty Harley Davidson Tools Fit Big Twin
1958-1999 (Except Twin Cam 88)!! |
$145.00 (Puller)
$235.00 (Reamer)
Shipped To Your Door!!
Select Either, Or Both, In The
Saddlebag!! |
 |
 |
Jims Cam Chain Tension Tool, For Harley Davidson
TC-88!! |
Specialty Harley Davidson Tools For Twin Cam
88 1999-Present!! Used
To Unload Pressure On the Primary & Secondary Chain Tensioners To Assemble
& Disassemble TC -88 Cams!! |
$44.00 Shipped To Your Door!! |
 |
 |
"Trock" Cam End Play Checker!! With Indicator!! |
Specialty Harley Davidson Tool For Use With Harley Davidson Big Twin
1970-1999 & Sportster Models 1971-2003!!
(Not For TC-88) |
$109.00 Shipped To Your Door!! |
 |
 |
Jims Tools, Harley Davidson Big Twin Cam Gear Remover
& Installer!! |
Specialty Harley Davidson Tool For Use On
Single Cam Big Twin 1970-1999!! Complete Kit!! |
$264.00 Shipped To Your Door!! |
 |
 |
Crane Quick Change Cam Installation Tools!!
Holds The Tappets In Place While You Work, So You Do
Not Have To Remove The Rocker Covers, Arms, Pushrods, Covers, Or Tappets!! |
Specialty Harley Davidson Tool For Use On Single Cam Big Twin
1948-1999!! Complete Kit,
Saves Time & Trouble!! |
$44.00 Shipped To Your Door!! |
 |
 |
Trock "Cam Jack"
Save Hours Time Assembly & Disassembly!! |
Specialty Harley Davidson Tool For Use On
Single Cam Big Twin 1948-1999!! |
$109.00 Shipped To Your Door!! |
 |
 |
Zipper's Cam Lobe Clearance Cutter!! |
Specialty Harley Davidson Tool For Use On
Single Cam Big Twin 1970-1999!! |
$154.00 Shipped To Your Door! |
 |