Handlebars For Metric Cruisers, Motorcycle Handlebars!!

Click On The Handlebar Pic To See These Custom Metric Handlebars Installed!!

*Honda & Suzuki models require minor drilling.

Click On The Handlebar Pic To See These Custom Metric Handlebars Installed!!

Built for comfort and great style, this bar was designed with a bend similar to the Starbar but used a massive 1-1/4" rigid tubing to give the bar extra thickness that will complement your cruiser's large front-end styling. Each handlebar is bored and dimpled to allow for internal wiring.*

Works with stock control lines on most bikes (Royal Star requires +2" cables). Fits motorcycles with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers (will not fit Baron Kickback Risers).

Click On The Handlebar Pic To See These Custom Metric Handlebars Installed!!

Classic ape hanger-style handlebar fabricated from fat, 1-1/4" tubing. This larger diameter tubing gives the bar that massive look, with the side benefit of added rigidity that lessens the normal flex you get in a traditional 1" ape hanger. Our bar rise is 16", a height we figured as the best possible to suit most riders. Each handlebar is bored and dimpled to allow for internal wiring.

Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers (will not fit Baron Kickback Risers).

Honda & Suzuki models require minor drilling.

Kong Handlebars Fit Suzuki models:  Intruder 1400, Intruder 800, Intruder LC 1500, Marauder, Volusia

Kong Handlebars Fit Yamaha Road Star ('99-'03)*, Royal Star, V-Star 1100 Classic, V-Star 1100 Custom, V-Star 650 Classic, V-Star 650 Custom

*Will fit '04 Road Stars equipped with Baron DT Risers.

Dimensions: Dia. 1-1/4", Width 40", Rise 16", Pullback 12"

Click On The Handlebar Pic To See These Custom Metric Flaming Suzuki & Yamaha Handlebars Installed!!

This  fat drag bar style has been  improved to suit heavier bikes by widening and re-angling the bar to increase rider leverage and control, while improving comfort. Bar is 1-1/4” diameter cold-rolled steel, polished and chromed. Fits with stock control lines.*

*Suzuki models require minor drilling.

These 6" Fat Drag Bar Custom Suzuki Handlebars  Fit The  Yamaha Road Star ('99-'04), Royal Star, V-Star 650 Classic, V-Star 650 Custom
 

Dimensions: Dia. 1-1/4", Width 33", Rise 6", Pullback 7"

Click On The Handlebar Pic To See These Custom  Yamaha & Suzuki Handlebars Installed!!

Designed to complement the contours of your tank, this highly stylized handlebar is the most comfortable drag bar we’ve ridden with. We took the fat drag bar style and improved it to suit heavier bikes by widening and re-angling the bar to increase rider leverage and control, while improving comfort.*

Drilled for internal wiring. Fits with stock control lines.

*Suzuki models require minor drilling

These Radius Drag Bar Custom Yamaha Handlebars Fit The Road Star ('99-'04), Royal Star, V-Star 1100 Classic, V-Star 1100 Custom, V-Star 650 Classic, V-Star 650 Custom, Warrior
 

Dimensions: Dia. 1-1/4", Width 33", Rise 7-1/2, Pullback 7-1/2
 

Click On The Handlebar Pic To See These Custom Flaming Suzuki & Yamaha Handlebars Installed!!

The hottest Drag Bar on the market now comes with etched flames in the tubing surface that'll make your bike a standout!

Designed to complement the contours of your tank, this highly stylized handlebar is the most comfortable drag bar we’ve ridden. We took the fat drag bar style and improved it to suit heavier bikes by widening and re-angling the bar to increase rider leverage and control, while improving comfort.*  Drilled for internal wiring. Fits with stock control lines.

*Suzuki models require minor drilling.

These Flaming Drag Bar Custom Yamaha Handlebars Fit The Road Star, Royal Star, V-Star 1100 Classic, V-Star 1100 Custom, V-Star 650 Classic, V-Star 650 Custom, Warrior
 

Dimensions: Dia. 1-1/4", Width 33", Rise 7-1/2, Pullback 7-1/2

Click On The Handlebar Pic To See These Custom Yamaha Handlebars Installed!!

The fat drag bar style and improved  to suit heavier bikes by widening and re-angling the bar to increase rider leverage and control, while improving comfort. Bar is 1-1/4” diameter with a 4-1/2” straight rise. Fits with stock control lines. Drilled for internal wiring.

Click On The Handlebar Pic To See These Custom Kawasaki  Handlebars Installed!!

Designed to complement the contours of your tank, this highly stylized handlebar is the most comfortable drag bar we’ve ridden with. The fat drag bar style improved to suit heavier bikes by widening and re-angling the bar to increase rider leverage and control, while improving comfort. Drilled for internal wiring. Fits with stock control lines.

Click On The Handlebar Pic To See These Custom Honda VTX Handlebars Installed!!

Designed especially for the VTX models, this bar is ergonomically designed to provide the rider with more comfort than the stock handlebar. You’ll find the bike is much easier to control at both low and high speeds, and at the end of your riding day you’ll note you are less fatigued. Fits with all stock control lines.

Click On The Handlebar Pic To See These Custom Honda VTX Handlebars Installed!

!

This handlebar uses our Rad'ius Bar bend while incorporating 1-1/2” diameter tubing to suit the massive size of the VTX. Ergonomically designed to offer the rider more leverage and widened to provide more control. Features radius bends in the risers to place the bar in a more comfortable position than conventional drag bars. Bolts directly to your upper triple tree and accepts all stock handlebar controls.

Sharply designed unique speedo mount that allows the stock speedometer to be attached to the risers and adjusted to different heights to suit the rider's preference (see photos).

The Speedo Mount Fits the following Honda models: VTX 1300/1800 (all models fitted with Baron Extreme Bars)

Speedo Mount is designed to fit the Xtreme Bar. Allows you to mount your stock speedo. The mount has a unique attachment method that does not require drilling and allows you to position the speedo at a height that suits your preference.

Show chromed for that perfect, integrated look. Easy install.
 

$79.00 (Speedo Mount)

 For These Custom Motorcycle Handlebars Shipped To Your Door!!

Select The Optional Speedo Mount For The Extreme Honda VTX Handlebars In The Saddlebag!!

Check Out How Your Specific Motorcycle Handlebar Risers Mount To Your Handlebars, These Fit 1" Motorcycle Handlebars, & Are Mounted With A 1/2" X 20 Thread Count Bolt,  Available At Your Local Hardware Store!!

Available In 4, 6 , 8, & 10 Inch Rise, Chrome, Or Black Finish, Very Slick Hidden Mounting Under The Spike Top!! 

Check Out How Your Specific Motorcycle Handlebar Risers Mount To Your Handlebars, These Fit 1" Motorcycle Handlebars, & Are Mounted With A 1/2" X 20 Thread Count Bolt,  Available At Your Local Hardware Store!!

 Shipped To Your Door!!

Select The Finish & Height Of Your Spike Risers In The Saddlebag!!

Authentic .44 Magnum Shell Casings,  Revolver Top Clamps Mount With Concealed Hardware, Available In 3", 6", Or 8" Rise!! 

Check Out How Your Specific Motorcycle Handlebar Risers Mount To Your Handlebars, These Fit 1" Motorcycle Handlebars, & Are Mounted With A 1/2" X 20 Thread Count Bolt,  Available At Your Local Hardware Store!!

Select Riser Height In The Bag!!

Check Out How Your Specific Motorcycle Handlebar Risers Mount To Your Handlebars, These Fit 1" Motorcycle Handlebars, & Are Mounted With A 1/2" X 20 Thread Count Bolt,  Available At Your Local Hardware Store!!

Available With Your Choice Of A 3, 4, OR 6 Inch Rise For The Perfect Handlebar Fitment!!

Check Out How Your Specific Motorcycle Handlebar Risers Mount To Your Handlebars, These Fit 1" Motorcycle Handlebars, & Are Mounted With A 1/2" X 20 Thread Count Bolt,  Available At Your Local Hardware Store!!

$119.00
(6 Inch Risers)

 For These Custom Motorcycle  Handlebar Risers Shipped To Your Door!!

Make Your Riser Height Selection In The Saddlebag!!