Harley Davidson Cams For 1984-1999 Evolution By Andrews

Andrews Engine Cams for Harley Davidson 1984-1999 Evolution Engines

. EV series cams are designed to maximize Evo motor performance while retaining hydraulic lifters. These Harley Davidson Evolution Andrews Cams offered bolt in with no head work in most cases. Note Shovelhead and V2 cams are not interchangeable.

Grind

Timing*

Duration

Lift

Springs

Application

Buy Cam Now!!

 Compare to Stock!!

Stock

85-91 

01/37

53/01

218

232

.495

.495

STOCK

Listed for comparison. 1984-87 cam is 212° intake 202° exhaust .472 lift on both valves

  Compare to Stock!!

Stock

92-95

-02/30

31/-09

208

202

.472

.472

STOCK

Listed for comparison. 92 cam very close to 84-87 specs. California Cams are approximately 178° duration.

EV13

15/31

45/13

226

238

.485

.495

STOCK

Bolt-in Harley Davidson cam for street or touring with more mid range and upper end power more power than stock EV cam. 

EV23

10/30

40/8

220

228

.498

.498

STOCK

Bolt-in Harley Davidson cam. Crisp throttle response and strong pulling power from 1600 to 6000 RPM

EV3

21/37

43/15

238

238

.495

.495

STOCK

Bolt-in Harley Davidson cam for light bikes (FXRS, etc). More mid range power. Idle smoothness unaffected. This is a 6000 RPM cam for stock heads and springs with hydraulic lifters.

EV27

20/36

44/16

236

240

.495

.495

STOCK

Bolt in street Harley Davidson cam with fast open and close ramps. Similar timing to EV3 but designed to produce a broad torque band. Pulls 1500-6000.

EV46

25/41

49/17

246

246

.495

.495

STOCK

Bolt in performance Harley Davidson cam with fast open & close ramps. Similar to EV3 but higher static compression pressure for 6000+ RPM with stock heads and hydraulic lifters.

EV51

48/24

54/22

252

256

.510

.510

STOCK

Easy installation Harley Davidson cam with longer duration for modified street engines with hydraulic. lifters. Power range from 3000-6500 RPM. 

EV59

28/48

56/24

256

260

.560

.560

HI LIFT

Updated EV57Andrews Harley Davidson Cam, fast ramps for modified 80-88” motors. Use with AP springs and collars. Broad power band; 6000 RPM, ok for hyd lifters.

EV72

30/54

60/28

264

268

.560

.560

HI LIFT

Updated EV7mAndrews Harley Davidson Cam, for 92” + Street. Use with Andrews springs & titanium collars. Broad power band; 2800-6000 RPM, ok for hydraulic lifters.

*Note: Timing measured at .053 cam lift.