 |
Wire
Plus Digital Speedometer/Tachometer For 1", OR 1.25" Handlebars!!
Chrome
Plated Wire Plus digital Speedomenter/Tachometer has a Compact 2 1/2"
design of the instrument panel combines all of the functions of multiple
gauges and indicators in one custom package without the need for an
external control box.
An on-screen push button allows access to a 3 digit readout with your
choice of MPH or KPH, tachometer, odometer, trip meter or battery voltage
read out.
Full complement of indicator lights include high beam, turn signals, low
oil pressure, neutral and service engine light.
Speedometer calibration is easily accomplished (with an on-screen push
button) by using a known distance such as highway mile markers.
The super bright display can be viewed easily in daylight but will
automatically dim at night.
Housing is designed so the 46" long lead wires can be routed on the inside
or on the outside of the handlebars. |
Speedometer will
require a transmission-mounted speed sensor (or like device)
Tachometer requires a digital tachometer trigger wire from your electronic
ignition (will not work off the primary terminal of the ignition coil).
Most aftermarket electronic advance ignitions include a separate digitally
operated tachometer output wire
Note: Due to the J1850 data bus used for communication between the
instrument cluster and the turn signal/security module these will not work
on 2004/Later models
Instructions included
Mounts on 1", OR 1.25" O.D. Handlebars between custom risers!! |
$479.00 For Either The 1", OR
The 1.25" Handlebar Mount Versions Of These Bad Azz Wire Plus Digital
Speedometer, Tachometer Units Shipped To Your Door!! |

Select Between Either A 1", Or 1.25" Handlebar Mounted Speedo/Tach In The
Saddlebag!!
OUT OF STOCK!! |