Dakota Digital Speedometers / Tachometers

0-199 MPH or KM/H Speedometer
0-8,000 RPM Bar Graph Tachometer with 0-16,000 numeric readout.  Performance Displays such as 0-60 MPH/KM/H Timer, 1/4 Mile Time and Speed, High Speed and RPM Recall.  Positive Locking Connectors for all Wires, Oil Pressure Gauge, (sender included).  Voltmeter, Fuel Level Gauge, (bike must be equipped with a stock sender)!!

All Backed by a 2 year warranty!!

0-199 MPH or KM/H Speedometer
0-8,000 RPM Bar Graph Tachometer with 0-16,000 numeric readout.  Performance Displays such as 0-60 MPH/KM/H Timer, 1/4 Mile Time and Speed, High Speed and RPM Recall.  Positive Locking Connectors for all Wires, Oil Pressure Gauge, (sender included).  Voltmeter, Fuel Level Gauge, (bike must be equipped with a stock sender)!!

All Backed by a 2 year warranty!!

This new gauge package is only 4.5” wide by 1.6” tall, a full 30% smaller than our popular HLY-5000X! Keeping the HLY-6000 clean and compact is an outbound control module (Which measures 3"x3"x1.5")  which centralizes wiring for easy installation and minimizes wire running to the gauge itself.

Fits Harley Davidson Big Twin, Custom!!

 This gauge features a new non-glare, high-brightness, vacuum fluorescent graphic display with no external enunciators for a black out effect when off. 

Gotta Be One Of The Slickest Products Around!!

Features: 0-255 MPH Speedo, 0-8000 RPM Bar-graph Tach with Adjustable Reference Point, Compatible with Single or Dual Fire Ignitions, Odometer/Trip Odometer, Turn-signal, High beam, Neutral, and Low Oil pressure Indicator, Not Compatible with Stock Automatic Turn-signal Cancel (requires TSI-1 for Compatibility)

Fits Harley Davidson Big Twin, & Custom!!

For Electronic or Cable Driven Speedo Application (purchase correct speed adaptor separately.)

HLY-5011 "Dakota Digital"  Digital Speedometer

Features include: 0-255 MPH Speedo, Odometer/Trip Odometer, Not Compatible with Stock Automatic Turn-signal Cancel (requires TSI-1 for Compatibility) Chrome Housing, Teal Non-Glare Readout

For Electronic or Cable Driven Speedo Application (purchase correct speed adaptor separately)

The HLY-5021 Bar Mount Oval Tachometer, 3.5-inchx2-inchx1.75-inch Features: 0-9990 RPM, Compatible with Single or Dual Fire Ignitions Chrome Housing, Teal Non-Glare Readout

Fits Harley Davidson Big Twin, & Custom!!

 Mounts To The Handle Bars using various mounts (Purchased Separately)  

HLY-2002 "Dakota Digital" 255 MPH Digital Speedometer/Tachometer Combo

The HLY-2001 Large Round Speedometer/Tachometer Combo, Replacement for most Fat Bob Single Large Speedo Applications, Will fit Fuel Injected or Carbureted applications. Chrome Bezel, Teal Non-Glare Readout

Replace That Old Gauge In Your Dash!!

For Electronic or Cable Driven Speedo Application (purchase correct speed adaptor separately)

Dakota Digital HLY-2004 "Harley "Fatbob" Instrument Replacement w/ Direct ECM Plug-In for 2004-05 Harley

255 MPH speedometer is already calibrated!  Odometer with two re-settable trip odometers.  Re-settable Miles to Service with warning (user settable countdown) and Hour meter.
Clock (12 hour format).  Quick response bar graph tachometer with adjustable shift point warning. Gear Position Indicator compatible with 3- 6 speed transmissions. Various indicators can also be displayed such as Turn Signal, High Beam, Neutral, Low Oil Pressure, Low Voltage and Security Indicators. Voltage readout. Cruise on and Cruise engaged indication.  Automatic turn signal canceling compatible. "Wait to start" / "Check Engine" light. Several performance calculations include: 0- 60 time, high speed & high RPM recall, 1/4 mile time and speed!!

Chrome front bezel with non-glare scratch resistant lens. Machined aluminum housing.

** Limited Two Year Warranty!

HLY-3015 "Dakota Digital" 199 MPH Digital Speedometer/Tachometer Combo

The HLY-3015 is packed with features including a 199 MPH speedometer, user selectable 0-5000, 0-8000 or 0-16,000 RPM bar graph tachometer, menu driven set up and calibration, odometer/trip, plus indicators for turn signals, high-beam, neutral, low oil pressure and check engine for fuel injected models.

Replace That Old Gauge In Your Dash!!

PGR-1000 series gear indicators for motorcycles are self programming. Simply hook them up and ride through all of the gears and you're done!   Available In Either Flush Mount, OR, Handlebar Mounted 7/8", Or, 1", Or, 1.25", Or 1.5".

1-7 gear readout, Neutral indicator, Self- Dimming, Chromed machined aluminum housing, Mounting bracket built in, with a 2 year warranty

Make Your Mounting Selection In The Saddlebag!!

Bar Mount For Most 1-Inch Diameter Bars With Built-In Risers.  Chrome Finish!!

Bar Mount For Most 1.25-Inch Diameter Bars With Built-In Risers.  Chrome Finish!!

Bar Mount For Most 1.5-Inch Diameter Bars With Built-In Risers.  Chrome Finish!!

Use With CUP-3001 To Secure To Bars.  Innovative Mount Conceals Most Hardware For A  Clean Look. Chrome Finish

Use With CUP-3001 To Secure To Bars.

Use With CUP-3001 To Secure To Bars.  Innovative Mount Conceals Most Hardware For A  Clean Look. Chrome Finish

Use With CUP-3001 To Secure To Bars.

Use With CUP-3001 To Secure To Bars.  Innovative Mount Conceals Most Hardware For A  Clean Look. Chrome Finish

Use With CUP-3001 To Secure To Bars.

Flat Triple-Tree Bar Clamp Mount, Replaces Stock Top-Clamp On Most Applications With Separate Pull-back Risers With Offset Upper And Lower Clamp Bolts.  Chrome Finish!! 

For Use With All Dakota Digital HLY-5000 & HLY-6000 Series Packages.

35 Degree Triple-Tree Bar Clamp Mount, Replaces Stock Top-Clamp on Most Applications with Separate Straight Risers with Offset Upper and Lower Clamp Bolts. Chrome Finish!!

Riser Mount For Most 1"  Diameter Bars With Built-In Risers And Standard Spacing. Attaches Directly To Risers. Chrome Finish!!

Riser Mount For Most 1-1/4"  Diameter Bars With Built-In Risers And Standard Spacing. Attaches Directly To Risers. Chrome Finish!!

Riser Mount For Most 1-1/2"  Diameter Bars With Built-In Risers And Standard Spacing. Attaches Directly To Risers. Chrome Finish!!

Chrome Plated Cup Securely Houses HLY-3000 Series 2-1/16" Diameter Gauges.  Fully Machined Aluminum Housing Includes Hardware For Mounting Any Dakota Digital Mini Round gauge.

 Electronic Speedometer Adjustment Module plugs inline with the factory speed harness on '96+ motorcycles with electronic speedometers. Allows simple push button correction of speedometer reading (from 200% to 50% of current reading) after a transmission, gearing or tire size change.

This unit is not needed with Dakota Digital speedometers.

Turn Signal Interface allows the use of factory turn signal cancel feature.