TTC Motorcycle Parts, Harley Parts Front End Page

Kuryakyn Skull Blade Spinner Axle Covers!! Only $109.00 A Pair!! Click The Pic For More Info, Or Buy Now!!	Kuryakyn Skull , OR Spike Blade Spinning Axle Covers!! The Blades On The Spinner Axle Covers Start Spinning Around 25 MPH Wind Speed!! Click Either Pic For More Info!!	Harley Davidson Fitment: ’84-’06 Softail Models (ex. Springer and Deuce), ’80-’99 Road Kings and Dressers, ’91-’03 Dyna with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportster, ’88-’00 FXR, ’80-’86 FXWG. OR ’00-’07 Road Kings and Dressers, ’04-’07 Dyna (ex. ’04-’05 FXDWG and ’07 FXDSE) OR ’07 Softail Models (ex. Springer and Deuce) and ’02-’07 V-Rod (ex. VRSCR)	*$109.00 A Pair Of Kuryakyn Spinner Blade Axle Covers Shipped To Your Door!!*	Kuryakyn Spike Blade Spinner Axle Covers!! Only $109.00 A Pair!! *Click The Pic For More Info, Or* Buy Now!!
Pick Up Just The Druid Trees Lower On This Page!!	Wyatt Gatling "Druid" Extended 41MM Wide Glide Fork Assembly With 6 Degree Raked Trees!! Includes The Bad Azz Druid 6 Degree Raked Trees(See The Pic To The Left) With Rocket Lower Leg Set, Which Will Accept Single Left Side 1984-99 Caliper!! Order Light, Fender, Risers, Caliper & Wheel Separately!!	*Wyatt Gatling "Druid" 41mm Wide Glide Extended Fork Assembly Available In +8 In Over To +16 Inches Over Stock Lengths!! (In 2 Inch Increments)* *With The 6 Degree Druid Raked Trees, You Can Bolt On A Much Longer Front-end!!*	*$1,200.00 (+8" Over Stock, $25.00 For Each Additional 2" Longer)* *Shipped To Your Door!!* *Select From 8 Inch Over, To 16 Inch Over In The Saddlebag!!*
	Doss "WaterFall" Front End Kit!! Designed By Master Customizer, Rick Doss, These Frontends Are Chrome CNC-Machined From Billet Aluminum & Feature "Waterfall" Styling Treatment Applied To The Outside Of The Fork Legs!! Hidden Axle & Billet Fork Boot Caps, The Triple Trees Have Hidden Top Stem Nut, Custom Adjustable/Removable Fork Stops, Head Cup Bearing Tension Adjustment Form Underneath Bottom Tree	Doss WaterFall Front-end Kit Fits Single & Dual Disk Softail, FXR, Sportstere, Dyna Glide & 4-speed FXWG Models From 1984 Thru 1999 & Custom Applications!!	*$1,429.00 (Stock), 1,449.00(2 Inches Over) Shipped To Your Door!!* *Select From Stock, Or 2 Inches Over Stock Rick Doss WaterFall Frontend Kits In The Saddlebag!!*
	41MM Single Disk Frontend!! Triple Chrome Plated 7075 Billet Aluminum Custom Heavy Duty Harley Davidson Front-end Assembly!! Milled Grove Accents On Both The Top & Bottom Trees, Reversible Fender Spacers Allowing For Either FXST, Or FLST Bolt Patterns!!	This Bad Azz Triple Chrome Plated, 7075 Billet Aluminum Custom Harley Davidson Frontend Fits FXST Softail Models 1984-1999 & Custom Motorcycles!! Monster Fork Assembly Comes With Head light Mount, Fork Cup Set, Bearings, Races, Axle & Spacers!!	*$1,649.00 Shipped To Your Door!!*
	*SPIKE FORK LEG SETS!!* *Chrome Billet Aluminum, Single Or Dual Disc For 41MM Forks!!* *Features removable fender mounts and removable brake caliper mount(s) for that minimalist chopper look!!*	Fits Harley Davidson FXST 1984/1999, FXWG 1985/1986 and FXDWG 1993/1999 & Custom Applications!! Requires minimum of 1" over fork tubes	*$529.00 Shipped to your door!!* *Select Either Single, Or Dual Disk Forks In The Saddlebag!!*
	*Chrome Single Disk FL/FLH Frontend* Direct Replacement for FLH Single Disk Models, Chrome Trees, and Lower Legs!! *Calipers Not Included*	*Fits Harley Davidson 1947-1977 FL, FLH, Or Custom* *Includes: Slider Covers, axle, nuts, bearings, and dust covers!!*	*$761.00 Shipped to your door!!!*
	*Sun Myth* Phatt Fork Assembly !! Features Smooth Top Tree, Massive Fork Tube Covers, Hidden Fork Stops, Smooth Billet Lower Legs & Hidden Axel!! Too Smooth!! Too Phatt!!!	Trees Are Stock FXST Rake!! Shipped Complete With Axle, Axle Nut, Spacer, Top Nut, Bearings, Cone Nut, Dust Cover, Triple Trees & Fork Tubes & Sliders. Fort tubes & Sliders Are Fully Assembled With Internals, You Assemble The Rest. Shipped Dry, You Add The Oil!!	*$1799.00 Shipped To Your Door!!* *Call Us On This Frontend If You Want Longer Than Stock!!*
	*TUV Approved Ultimate Heritage-Style Frontend!!* Kit Includes Rick Doss Housing Headlight Kit With Slider Covers (cowbells), & Handlebar Clamp Cover, Chrome Triple Trees With Chrome Bearing Dust Cover, Timken Bearings & complete Fork Leg Assemblies & Chrome Sliders!! You Also Will Need, Stock, Or Aftermarket 1984-1999 Front Calipers & Rotors, 11/16th" Bore Master Cylinder & A Dual Flange Front Wheel To Complete The Conversion On The Dual Disk, Smaller Master Cylinder Will Work With The Single Disk Version Of The Ultimate Frontend Kit .	Ultimate Frontend Kit Fits Harley Davidson FL Softail Models 1986-1999!! TUV Approved For The European Union (Meets All Specs, (Higher Standards Than Required In The USA)!!) *Calipers Rotors & 16 Inch X 3 Inch Wheel Shown NOT Included, Pick The Wheel Up Below!!*	$1,779.00 (Single Disk) $1,799.00 (Dual Disk) Shipped To Your Door!! *Select Single, Or Dual Disk Front-end In The Saddlebag!!*
	*TUV Deluxe Dual, Or Single Disk Heritage-style Harley Davidson Softail Front-end Kits!!* *Kit Includes Rick Doss Ribbed 7 Inch Headlight, Chrome Fork Tins, Slider Covers (Cowbells(, Triple Trees, complete Fork Leg Assemblies & Dustcovers & Timken Bearings!!*	*Front-End Kit Fits Harley Davidson FL Softtail Models 1986-1999!!* *TUV Approved For The European Union (Meets All Specs, (Higher Standards Than Required In The USA)!!)* *Calipers Rotors & 16 Inch X 3 Inch Wheel Shown NOT Included, Pick The Wheel Up Below!!*	*$1,299.00 (Single Disk)* *$1,349.00 (Dual Disk)* *Shipped To Your Door!!* *Select Single, Or Dual Disk Front-end In The Saddlebag!!*
See Pic Directly Above Of The Wheel!!	16 X 3 Inch, 40 Spoke, Chrome Dual Flange Front Wheel!!	*Custom Wheel Fits The Ultimate & Deluxe Dual Disk Front-end For Harley Davidson FL Softail Above & Custom!!*	*$399.00 Shipped To Your Door!!!*
	*TUV Dual Disk, Custom Chrome, Or Polished Sliders, Custom Harley Davidson Softail Front-end Conversion Kits!!* *Kit Includes Triple Trees, Assembled Dual Disk Fork Legs Bearing Dustcovers & Timken Bearings!!* *You Also Will Need, Two, Stock, Or Aftermarket 1984-1999 Front Calipers & Rotors, 11/16th" Bore Master Cylinder & A Dual Flange Front Wheel To Complete The Conversion.*	*Front-End Kit Fits Harley Davidson FX Softtail Models 1984-1999 & 4-Speed FXWG Models & Customs!!* *TUV Approved For The European Union (Meets All Specs, (Higher Standards Than Required In The USA)!!)* *Calipers Rotors, & 21 Inch X 2.15 Inch Wheel Shown NOT Included, Pick The Wheel Up Below!!*	$1,149.00 (Chrome Sliders) $1,049.00 (Polished Sliders) Shipped To Your Door!! *Select Slider Finish In The Saddlebag!!*
See Pic Directly Above Of The Wheel!!	21 X 2.15 Inch, Chrome 40 Spoke, Dual Flange Front Wheel!!	*Custom Wheel Fits The Dual Disk Front-end For Harley Davidson FX Softail Above & Custom!!*	*$349.00 Shipped To Your Door!!!*
	"Martin Brothers" Custom, Chrome, Or Raw Steel Fork Brace!! Eliminates Front-End Flop On Extended Front-Ends!!	Constructed Of Hardened 3/16" Steel, & Available In Either Raw Steel, Or Chromed To A Show Finish, Comes With 1" Billet Spacers!!	*$215.00 (Raw Steel Finish)* *$225.00 (Chrome Finish)* *Shipped To Your Door!!*	*Select The Finish For The Fork Brace In The Saddlebag!*
As Seen On The Druid Frontend!!	Druid Chromed Triple Trees Chromed Billet Aluminum, 6 Degree Rake, As Seen On The Druid Frontend!!	*41MM Wideglide Triple Trees For Harley Davidson & Custom Applications!!*	*$389.00 Shipped to your door!!!*
	3 Degree Raked Chromed Triple Trees OEM STYLE, With A 3 Degree Rake Built In!!	*41MM Wideglide Triple Trees For Harley Davidson & Custom Applications!!*	*$259.00 Shipped to your door!!!*
	Chromed Hidden Hardware, Tribal Spike Raked Triple Trees!! Available In A 3, Or 6 Degree Rake, Smooth Top With The Hidden Fork Plugs, Show Quality!!	41MM Wideglide Triple Trees For Harley Davidson & Custom Applications!! Pre-Drilled For Internal Forkstops, (Not Included, Pick It Up Below)!!	*$449.00 Shipped To Your Door!!!*	*Select From Either 3 Degree, Or 6 Degree Raked Triple Trees In The Saddlebag!!*
	Progressive Suspension Lowering Kit, 39mm Lowers your Frontend up to 2” depending on the spacer!!	Fits Harley Davidson & Custom 1987-93 FXRS-SP, 1988-93 FXRT, 1991-UP Dyna (not FXDWG) Or 1987-94 FXLR, 1988-95 FXR-FXRS, Or 1995-up FXD	*$120.00 Shipped to your door!!!* *Select Year/Model In The Bag!!*
	Progressive Suspension Lowering Kit, 41mm Lowers your Frontend up to 2” depending on the spacer!!	*Fits Harley Davidson & Custom 1984-up FXST-FLST-FLSTF-FXDWG, Or 1980-up FLT-FLHT-FLHS, Or 1980-86 FXWG, Or 1948-84 FL, Or 2002 V-ROD*	*$120.00 Shipped to your door!!!* *Select Year/Model In The Bag!!*
	*Chrome Smoothie Neck Cup Kit!!* *Includes Races, 1" Bearings, & Dust Cover Set!!*	*Fits All Harley Davidson Big Twins, Sportsters & Custom With 1" Neck.*	*$72.00 Shipped to your door!!!*
	*Chrome Neck Cup Kit With Internal Fork Stops!!* *Kit Allows The Choice Of A Turning Radius Of 35 Or 45 Degrees & Includes 1" Bearings & Races, Dust Covers, & Internal Forkstop Hardware!!*	*Fits All Harley Davidson Big Twins & Sportsters Frames That Use Press-In 1"Neck Race & Bearing Cups!!* *Instructions Included!!*	*$139.00 Shipped To Your Door!!!*
	*Smooth Chrome Neck Cup Kit With Internal Fork Stops!!* *Kit Allows The Choice Of A Turning Radius Of 35 Or 45 Degrees & Includes 1" Bearings & Races, Dust Covers, & Internal Forkstop Hardware!!*	*Fits All Harley Davidson Big Twins & Sportsters Frames That Use Press-In 1"Neck Race & Bearing Cups!!* *Instructions Included!!*	*$119.00 Shipped To Your Door!!!*
	Complete Kickstand Re-Positioning Kit To Restore The Correct Lean To Your Bike After Lowering Your Front Forks (Also in Pegs Pages)	Fits Big Twin OEM and After Market Harley Davidson FL, FX, FXE, FXWG FXST	*$45.00 Shipped to your door!!!*
Out Of Stock!!	NEW!! 58MM Inverted Front-end, Custom Fork Assembly!! Features Hidden Axle Design, feature massive 58mm chrome plated upper tubes and triple trees made from 6061-T6 aluminum, Bullet shaped lowers with a completely hidden axle design and exceptional dampening ability for a superior functioning product.!!	Kit Includes Forks and Triple tree assembly, Axle kit with spacers, Stem Nut and Fork Lock Bracket These Inverted forks were designed to use 84/99 FXST style Wheel Assemblies with a Single Disc. *Triple trees are machined for, but do not include, both internal fork stop or External fork stops Std Length is OEM FXST length.*	*$775.00 (FXST Stock Length, $10.00 For Each Additional 2" Longer Over Stock)* *Shipped To Your Door!!* *Select FromS tock FXST Length, 2 Inch Over, Or 4 Inch Over In The Saddlebag!!*	*Out Of Stock!!*