Shovelhead Engines

Replica Harley Davidson Shovelhead Engines

Shipping Within The Continental US (excluding Alaska) Is Included In The Chopped Prices On These Replica Harley Davidson Shovelhead Engines!!  We Ship Shovelhead Motors Almost Everywhere, Worldwide, It Just Costs A Little More!!
<< Evolution Engines >>    << Shovelhead Engines >>    << Knucklehead Engines >>    << Panhead  Engines >>

Shovelhead Engine 103" S&S 103" S&S Shovelhead Engine!!

This S&S 103" Shovelhead Engine Features Dual Plug Heads, S&S Super G Carb, S&S Super Stock Ignition & Roller Rocker Arms!!

This 103" S&S Shovelhead Engine is .300" Taller Than Stock and will not fit in a stock Shovelhead Frame!! Call For The Best Pricing On This  103" S&S Shovelhead Engine  Shipped To Your Door!  
Shovelhead Engine

Stock 74 Cubic Inch Shovelhead Engine!!

Shovelhead Top End Includes USA Made Stock Type Single Plug Heads With Chrome Steel Pushrod Covers & Polished Rocker Boxes, Shafts & Arms Installed

74" Replica Replica Harley Davidson Flat Side Shovelhead Engine Long Block 

This Shovelhead Motor Features Sifton Oil Pump/Breather Assembly, S&S Stock Stroke Flywheel, Timken Bearing, Stock FLH Cam Properly Installed With Matched Pinion & Cam Gear With Torrington Full Compliant Bearing.  Assembly Is Supplied With A Natural Finish.  Flatside 1966-69 Stock Style Cam Cover, Chrome Lifter Blocks, fitted with Hydraulic Tappets & Stock Style Pushrods. Stock Style Cylinders With standard compression of 8.5:1 Cast Pistons & Hasting Rings.  Clamp Style Automatic Advance Distributor Included!!  Order Manifold (Flat Seal Type) & Generator Separately.  

This Replica Harley Davidson Shovelhead Engine Fits Anything You Can Stuff It In!!

These Shovelhead Motors Are Shipped Fully Assembled &, Pre-Run, Ready To Stuff In Your Frame!!

 
Shovelhead Engine

Stock 80 Cubic Inch Shovelhead Engines

Shovelhead Top End Includes USA Made Stock Type Single Plug Heads With Chrome Steel Pushrod Covers & Polished Rocker Boxes, Shafts & Arms Installed

80" Replica Harley Shovelhead Engine Long Block 

This Shovelhead Motor Features Sifton Oil Pump/Breather Assembly, S&S Stock Stroke Flywheel, Timken Bearing, Stock FLH Cam Properly Installed With Matched Pinion & Cam Gear With Torrington Full Compliant Bearing.  Assembly Is Supplied With A Natural Finish.  Chrome Lifter Blocks, fitted with Hydraulic Tappets & Stock Style Pushrods. Stock Style Cylinders With standard compression of 8.5:1 Cast Pistons & Hasting Rings.   Order Manifold (Flat Seal Type) & Alternator/Stator Separately.  

This Replica Harley Davidson Shovelhead Engine Fits Anything You Can Stuff It In!!

These Shovelhead Motors Are Shipped Fully Assembled & Pre-Run, Ready To Stuff In Your Frame!!

 
Shovelhead Engine

Shovelhead Engine Stock 80 Cubic Inches

Shovelhead Top End Includes Stock Type Single Plug Heads With Stainless Valves, With Shafts & Arms Installed.

80" Replica Harley Davidson Shovelhead Engine Long Block 

This Shovelhead Motor Featuring S&S Crankcase, Sifton Oil Pump/Breather Assembly & Stock Stroke Flywheel, Timken Bearings, Stock Cam Properly Installed With Match Pinion & Cam Gear With Torrington Bearing.  Assembly Is Supplied With Chrome Nose Cover & Chrome Lifter Blocks, Fitted With Hydraulic Tappets & Stock Style PushRods.  Cylinders Are 31/2" Stock Style With Standard Compression Pistons & Hastings Rings.  Order Manifold (Flat Seal Type) & Alternator/Stator & Ignition System Separately.  

This Replica Harley Davidson Shovelhead Engine Fits Anything You Can Stuff It In!!

These Shovelhead Motors Are Shipped Fully Assembled &, Pre-Run, Ready To Stuff In Your Frame!!

 
Shovelhead Engines

Shovelhead Engine Larger Than Stock 88 Cubic Inches

Shovelhead Top End Includes Stock Type Single Plug Heads With Stainless Valves, With Shafts & Arms Installed.

88" Replica Harley Shovelhead Engine Long Block (4.5" Stroke!!)

This Shovelhead Motor Featuring S&S Crankcase, Sifton Oil Pump/Breather Assembly & Stock Stroke Flywheel, Timken Bearings, Stock Cam Properly Installed With Match Pinion & Cam Gear With Torrington Bearing.  Assembly Is Supplied With Chrome Nose Cover & Chrome Lifter Blocks, Fitted With Hydraulic Tappets & Stock Style PushRods.  Cylinders Are 31/2" Stock Style With Standard Compression Pistons & Hastings Rings.  Order Manifold (Flat Seal Type) & Alternator/Stator & Ignition System Separately.  

This Replica Harley Davidson Shovelhead Engine Fits Anything You Can Stuff It In!!

These Shovelhead Motors Are Shipped Fully Assembled & Pre-Run, Ready To Stuff In Your Frame!!

 
Shovelhead Engine, Short block

Shovelhead Engine Short Block, Stock Stroke Flywheels

80 Cubic Inch Harley Davidson Shovelhead Short Block 1973-1984

Shipped Fully Assembled As Shown, S&S Crankcase, Sifton Oil Pump/Breather Assembly, Timken Bearings, Stock Cam Properly Installed With A Match Pinion And Cam gear With Torrington Bearing.  Chrome Nose Cone Cover, Chrome Lifter Blocks, Fitted With Standard Tappets, That Accept Hydraulic Or Solid Lifters!!

This Stock Shovelhead Short Block Fits Harley Davidson Shovelhead 1973-1984    
Shovelhead Engine Generator Shortblock  Shovelhead/Panhead/Knucklehead Engine Shortblock!!

Shipped fully assembled as shown. Both 80” units feature an S&S Crankcase, Sifton Oil Pump/Breather assembly, stock stroke flywheel, Timken Bearings, stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets which will accept a hydraulic lifter unit or solid conversion kit not included!!

This Engine Shortblock Is Available  As A 1941-1947 74" Knucklehead, OR The 1956-1962 74" Panhead, OR A 1963-1964 74" Panhead, OR A 1963-1964 80" Panhead, OR A 1965 74" Panhead, OR A 1965 80" Panhead, OR, A 1966-69 74" Shovelhead!!  
Make Your Year Model  Panhead, Shovelhead, or Knucklehead Engine Shortblock Selection In Checkout!!

Replica Harley Davidson Generator Style Shovelhead Engine Cases!!
These Replica Harley Davidson Shovelhead Engine Case Sets Are Available For Either 1966-1967, OR 1968-1969 Shovelheads!!
 

Replica Harley Davidson Generator Shovelhead Engine Case Sets!!

 “Shop Ready” Replica Case Sets feature original style fitments including, left side number boss, which is left blank for original numbers with manufacturer’s numbers on right underside.  Sets have generator strap mount tab and relay boss as required but have thicker left side case for added strength. Main bearing races are line lapped!!

These components are pre-installed:
• Cam Bushing or Bearing
• Left Case Race or Timken Assembly
• Idler Gear Stud
• Circuit Breaker Stud
• Oil Pump Drive Bushing
• Right Case Bushing
• Cylinder Base Studs
• Dowel Pins
• Case Bolt Set
• Tappet Oil Screen
• Breather Tube
• Drain and Timing Plug
 

Make Your Year Model Shovelhead Engine Cases Selection In checkout!

<< Evolution Engines >>    << Shovelhead Engines >>    << Knucklehead Engines >>    << Panhead  Engines >>

 

 

Harley Davidson Disclaimer:
Harley Davidson, Shovel Head,  ShovelHead,  - Are registered trademarks of the Harley Davidson Motorcycle Company. Any use of previous trademarks are purely for reference purposes and not intended as copyright infringement .  We Just Want To Sell Replica Harley Davidson Shovelhead Engines!!

Shovelhead Engines, Shovel Head Motors
Copyright 2000-2009 Tejas Thump Cycles - Motorcycle Parts