Panhead Engines, Motors From TTC

Panhead Engine With STD Dual Plug Heads With Late Type Intake Ports & 3 -Bolt Exhaust Flanges, Complete Fitted With Rocker Assemblies!! S&S Cases & Cylinders!!	*"Frankenpan" 88" Generator-Alternator Panhead Engine!!* Features S&S Alternator Left Hand Case & Generator Right Hand Case. Assembled With V-Twin Oil Pump/Breather Assembly, S&S 4 1/4 Stroke Flywheels, Timken Main Bearing, Stock FLH Cam With Matched Pinion Gear Installed With Torrington Full Compliant Needle Bearing. Cast Finish Cam Cover, Automatic Advance Distributor, Chrome Lifter Blocks, Fitted with Hydraulic Tappets & Pushrods. S&S 3 5/8" Cylinders, with 7.75:1 Compression Ratio Cast Pistons. Chrome Pan Covers, Polished Thick D-Rings, Chrome Pushrod Covers & Chrome Rocker Box Feed Line!!	*This Frankenpan 88" Panhead Engine Fits Anything You Can Stuff It In!!* *Order Intake Manifold (Shovel Band Type) & Carburetor Separately.*	*$6,700.00 Shipped to your door!!!* *Shipped Fully Assembled , Pre-Run, Ready To Stuff In Your Frame!* *Be Sure To Pick Up The Generator Oil-Filter Adapter At The Bottom Of The Page To Fill The Generator Hole!!*
Cylinders Are Stock Replacement With Std Compression 8.5:1 Cast Pistons & Hastings Rings Automatic Advance Distributor Included! Chrome Pan Covers!!	*1958 Style 74 Cubic Inch Replica Panhead Motor!!* S&S Crankcases, Sifton Oil pump/Breather Assembly. S&S Stock Stroke Flywheels, Timken Bearing, Stock FLH Cam Properly Installed With A Matched Pinion & Cam Gear With Torrington Full Compliment Bearing. Cast Finished Ribbed Cam Cover, Chrome Lifter Blocks & Hydraulic Tappets & Stock Steel Pushrods & Chrome Steel Pushrod Covers. Top End Includes Single Plug S.T.D Panhead Head, Fitted With Rocker Arm Assemblies, Chrome Pan Covers With Thick D-Rings!!	*This Replica Panhead Engine Fits Harley Davidson Big Twin, & Custom Frames!!* *1958 Style Replacement Motor!!*	*$6,199 Shipped to your door!!!* *Shipped Fully Assembled , Pre-Run, Ready To Stuff In Your Frame!* *Select Style: Chrome Or Alloy Finish!! Thats Either "Chrome" Pans And Lifter Blocks, Or "Alloy" (Stainless Pans, & Zinc Plated Lifter Blocks) Pic Is Chrome!!*
Automatic Advance Distributor Included! Chrome Pan Covers!! Cylinders Are Stock Replacement With Std Compression 8.5:1 Cast Pistons & Hastings Rings	*1958 Style 74 Cubic Inch Replica Panhead Motor With Stock Exhaust Ports!!* S&S Crankcases, Sifton Oil pump/Breather Assembly. S&S Stock Stroke Flywheels, Timken Bearing, Stock FLH Cam Properly Installed With A Matched Pinion & Cam Gear With Torrington Full Compliment Bearing. Cast Finished Ribbed Cam Cover, Chrome Lifter Blocks & Hydraulic Tappets & Stock Steel Pushrods & Chrome Steel Pushrod Covers. Top End Includes Single Plug S.T.D Panhead Head, Fitted With Rocker Arm Assemblies, Chrome Pan Covers With Thick D-Rings!!	*This Replica Panhead Engine Fits Harley Davidson Big Twin, & Custom Frames!!* *1958 Style Replacement Motor!!* *Exact Same Panhead Motor As Listed Above With Stock Exhaust Ports, For The True To Stock Look, & Use With Stock Style Pipes!!*	*$6,199 Shipped to your door!!!* *Shipped Fully Assembled , Pre-Run, Ready To Stuff In Your Frame!*
Cylinders Are Stock Replacement With Std Compression 8.5:1 Cast Pistons & Hastings Rings Automatic Advance Distributor Included! Chrome Pan Covers!!	*1963-1964 Outside Oiler Style 74 Or 80 Cubic Inch Replica Panhead Motor!!* S&S Crankcases, Sifton Oil pump/Breather Assembly. S&S Stock Stroke Flywheels, Timken Bearing, Stock FLH Cam Properly Installed With A Matched Pinion & Cam Gear With Torrington Full Compliment Bearing. Cast Smooth Cam Cover, Chrome Lifter Blocks & Hydraulic Tappets & Stock Steel Pushrods & Chrome Steel Pushrod Covers. Top End Includes Single Plug S.T.D Panhead Head, Fitted With Rocker Arm Assemblies, Chrome Pan Covers With Thick D-Rings!!	*This Replica Panhead Engine Fits Harley Davidson Big Twin, & Custom Frames!!* *1963-1964 Style Replacement Motor!!*	74 Inch $829.00 80 Inch $5719.00 Shipped to your door!!! *Shipped Fully Assembled , Pre-Run, Ready To Stuff In Your Frame!* *Select Between Stock 74 Cubic Inch, Or 80 Cubic Inch Motor*
Automatic Advance Distributor Included! Chrome Pan Covers!! Cylinders Are Stock Replacement With Std Compression 8.5:1 Cast Pistons & Hastings Rings	*1965 Outside Oiler Style 74 Or 80 Cubic Inch Replica Harley Davidson Panhead Motor!!* S&S Crankcases, Sifton Oil pump/Breather Assembly. S&S Stock Stroke Flywheels, Timken Bearing, Stock FLH Cam Properly Installed With A Matched Pinion & Cam Gear With Torrington Full Compliment Bearing. Cast Smooth Cam Cover, Chrome Lifter Blocks & Hydraulic Tappets & Stock Steel Pushrods & Chrome Steel Pushrod Covers. Top End Includes Single Plug S.T.D Panhead Head, Fitted With Rocker Arm Assemblies, Chrome Pan Covers With Thick D-Rings!!	*Fits Harley Davidson Big Twin, & Custom!!* *1965 Style Replacement Motor!!*	*$5,959.00 Shipped to your door!!!* *Shipped Fully Assembled , Pre-Run, Ready To Stuff In Your Frame!* *Select Between Stock 74 Cubic Inch, Or 80 Cubic Inch Motor*
	*Shovelhead/Panhead/Knucklehead Engine Shortblock!!* Shipped fully assembled as shown. Both 80” units feature an S&S Crankcase, Sifton Oil Pump/Breather assembly, stock stroke flywheel, Timken Bearings, stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets which will accept a hydraulic lifter unit or solid conversion kit not included!!	This Engine Shortblock Is Available As A 1941-1947 74" Knucklehead, OR The 1956-1962 74" Panhead, OR A 1963-1964 74" Panhead, OR A 1963-1964 80" Panhead, OR A 1965 74" Panhead, OR A 1965 80" Panhead, OR, A 1966-69 74" Shovelhead!!	*$3,099.00-$3,149.00 On The Panhead & Shovelhead Engine Short-blocks, $4,149.00 On The Knucklehead Engine Shortblock, Priced Shipped To Your Door!!*	Make Your Year Model Panhead, Shovelhead, or Knucklehead Engine Shortblock Selection In The Saddlebag!!
*These Replica Harley Davidson Panhead Engine Case Sets For Replacement On 1941-1947, Or 53-53, Or 55-57, OR 58-62, OR 63-64, OR 1965 Panhead Engines!!*	*Replica Harley Davidson Panhead Engine Case Sets!!* “Shop Ready” Replica Case Sets feature original style fitments including, left side number boss, which is left blank for original numbers with manufacturer’s numbers on right underside. Sets have generator strap mount tab and relay boss as required but have thicker left side case for added strength. Main bearing races are line lapped!!	These components are pre-installed: • Cam Bushing or Bearing • Left Case Race or Timken Assembly • Idler Gear Stud • Circuit Breaker Stud • Oil Pump Drive Bushing • Right Case Bushing • Cylinder Base Studs • Dowel Pins • Case Bolt Set • Tappet Oil Screen • Breather Tube • Drain and Timing Plug	*$1,085 To $1,149 For The Replica Panhead Engine Case Sets, $85.00 For The Bearing Cages & Roller Kits, Priced Shipped To Your Door!!*	Make Your Year Model Panhead Engine Cases & Cages & Roller Kit Selections In The Saddlebag!!
	*Alloy Generator Oil-Filter Adapter!!* *Bolts In Place Of The Generator When Running A Left Hand Alternator Case For Your Charging System!! Use Replacement Filter 40-0709*	*Fits Harley Davidson Generator/Alternator Case Conversions!!*	*$99.00 Shipped to your door!!!* *Get The Filter Below!!*
Filter On Adapter Above!!	*Chrome Oil Filter 40-0709*	*Fits Alloy Generator Oil-Filter Adapter Above!!*	*$8.50 Shipped to your door!!!*
	Chromed Billet Aluminum Panhead Cover Set!! Machined From A 8”x6”x4” Thick Piece Of Billet Aluminum, These Custom Panhead Covers Reduce Top End Noise, Eliminate Valve Cover Oil leaks & Dissipate Heat Faster Than Stock Covers.!	*These Chromed Billet Panhead Covers Fit 1948-1965 Panheads & Are Ideal For High Lift Cam Motors, That Need That Extra Clearance Between The Valve Springs & Pan Covers!!*	*$449.00 For A Set Of These Chromed Billet Aluminum Panhead Covers Shipped To Your Door!!*
	Polished Finish Finned Panhead Rocker Covers!! True Old School Custom, The Same as they've always been, since 1968, mfg. in the USA. Cast out of A356T6 material these covers are virtually warp and leak free!!	*These Polished Finish Finned Panhead Covers Fit 1948-1965 Harley Davidson Panhead Heads!!*	*$340.00 For A Set Of These Polished Finned Panhead Rocker Covers Shipped To Your Door!!*
	Cast Finish Finned Panhead Rocker Covers!! True Old School Custom, The Same as they've always been, since 1968, mfg. in the USA. Cast out of A356T6 material these covers are virtually warp and leak free!!	*These Cast Finish Finned Panhead Covers Fit 1948-1965 Harley Davidson Panhead Heads!!*	*$269.00 For A Set Of These Cast Finish Finned Panhead Rocker Covers Shipped To Your Door!!*
The High-Flow Element For This Custom Harley Davidson Oil Cooler / Filter Is Made From A Medical Grade Type 304 Stainless Steel Micronic Filter Cloth That Will Trap Contaminants That Far Exceed The OEM Requirements!!	*Custom Harley Davidson Oil Cooler/Filter!!* *This Harley Davidson* Chrome Plated, Oil Cooler/ Filter Is CNC Machined From 6061 T6 Billet Aluminum, Finned For Oil Cooling, With a Cleanable Stainless Steel Mesh Element, This May Be The Last Oil Filter You Will Ever Buy!! This Harley Davidson Oil Cooler / Filter Features A Quad-Type Filter Housing To Engine Case Seal, Bypass Valve & Meets, Or Exceeds The Manufacture's Specifications (Will NOT Void New Bike Warranties) *This Harley Davidson Oil Cooler/Filter Also Includes A Super Strength Nickel Plated Neodymium Rare Earth magnet Installed In The Top Of The Element For Pre Filter The Oil!!* *Easily Cleaned With Any Type Of Degreaser Or Soap & Water!!*	This Custom Harley Davidson Oil Cooler/Filter Will Fit Harley Davidson With 3/4-16 Thread Including Shovelhead 5 Speed 1980/Later, Big Twin Evolution 1984/Later, Twin Cam 1999/Later & Sportster Late 1984/Later , OR Harley Davidson With 20 x 1.5mm Thread, 2002-Up V-Rods!! *Includes Cup Wrench & Instructions!!*	*$165.00 For This Custom Harley Davidson Oil Cooler/Filter Shipped To Your Door!!* *Select The Oil Cooler / Filter For Your Model Harley Davidson In The Saddlebag!!*

Harley Davidson Disclaimer:
Harley Davidson, Pan Head, PanHead, - Are registered trademarks of the Harley Davidson Motorcycle Company. Any use of previous trademarks are purely for reference purposes and not intended as copyright infringement . We Just Want To Sell These Replica Harley Davidson Panhead Engines!!