Harley Davidson Knucklehead Engines
 

Replica Harley Davidson Knucklehead Engines

Free Shipping On These Replica Harley Davidson Knucklehead Engines Within The Continental US (excluding Alaska, Hawaii & Puerto Rico)!!  We Ship Knucklehead Engines Almost Everywhere, Worldwide, You Just Have To Pay The Additional Shipping Fees!!

<<Knucklehead >> << Panhead >> << Shovelhead >> << Evolution >>
61" Knucklehead Engine

Replica Knucklehead Crank Cases  With Authentic Cast Profiles, With Replica Harley Davidson Knucklehead Oil Pump /With Early Iron Cover!!

61" Replica Knucklehead Engine!!

Shipped Fully Assembled Less Carburetor & Generator & Shop Tested For Oil Pressure!!  Knucklehead Rocker Boxes With Natural Finish & Overhead Oiler Provision From Timing Cover.  Truett & Osborn Flywheels, Stock Rods & Torrington Rollers With Steel Cages At Sprocket & Pinion Shaft Ends. Cast Iron Cylinders Fitted With 8.5:1 Cast Pistons & Hasting Rings. Mechanical Advance Distributor, With Corresponding Relay Mount With Distributor Post Glide Slot!

Replica Harley Davidson Knucklehead!!

Stock 4" Stroke With Newly Cast Knuckleheads With  Lower Valve Cover Cups & Tops. Solid Tappet Assemblies With Sifton Lightning Cam, Sifton Solid Stock Push Rods & Chrome Pushrod Covers. Linkert Style 4 Bolt Manifold With Plumber Style Nuts & Brass Seals!!

$8,450.00

Free Shipping On These Replica Harley Davidson Knucklehead Engines Within The Continental US (excluding Alaska, Hawaii & Puerto Rico)!!

 
Knucklehead Engine

Replica Crank Cases With Sifton Oil Pump!!

74" Replica Knucklehead Engine!!

Shipped Fully Assembled Less Carburetor & Generator & Shop Tested For Oil Pressure!!  Rocker Boxes With Natural Finish & Overhead Oiler Provision From Timing Cover.  Truett & Osborn Flywheels, Stock Rods & Torrington Rollers With Steel Cages At Sprocket & Pinion Shaft Ends. Cast Iron Cylinders Fitted With 8.5:1 Cast Pistons & Hasting Rings. Mechanical Advance Distributor, With Corresponding Relay Mount With Distributor Post Glide Slot!

Replica Harley Davidson Knucklehead!!

Stock 4" Stroke With Newly Cast Knuckleheads With  Lower Valve Cover Cups & Tops. Solid Tappet Assemblies With Sifton Lightning Cam, Sifton Solid Stock Push Rods & Chrome Pushrod Covers. Linkert Style 4 Bolt Manifold With Plumber Style Nuts & Brass Seals!!

$7,500.00

Free Shipping On These Replica Harley Davidson Knucklehead Engines Within The Continental US (excluding Alaska, Hawaii & Puerto Rico)!!

 
Knucklehead Engine

Replica Crank Cases With Sifton Oil Pump!!

84" Stroker Replica Knucklehead Engine!!

Shipped Fully Assembled Less Carburetor & Generator & Shop Tested For Oil Pressure!!  Rocker Boxes With Natural Finish & Overhead Oiler Provision From Timing Cover.  Truett & Osborn Flywheels, Stock Rods & Torrington Rollers With Steel Cages At Sprocket & Pinion Shaft Ends. Cast Iron Cylinders Fitted With 8.5:1 Cast Pistons & Hasting Rings. Mechanical Advance Distributor, With Corresponding Relay Mount With Distributor Post Glide Slot!

Replica Harley Davidson Stroker  Knucklehead!!

4.5" Stroke, With Newly Cast Knuckleheads With  Lower Valve Cover Cups & Tops. Solid Tappet Assemblies With Sifton Lightning Cam, Sifton Solid Stock Push Rods & Chrome Pushrod Covers. Linkert Style 4 Bolt Manifold With Plumber Style Nuts & Brass Seals!!

$8,195.00

Free Shipping On These Replica Harley Davidson Knucklehead Engines Within The Continental US (excluding Alaska, Hawaii & Puerto Rico)!!

 
Knucklehead Engine, With Alternator 87” Stroker Alternator-Generator Knucklehead Engine!!

This Knucklehead Engine Long Block features a alternator left hand case & generator right hand case.   Each 87” Knucklehead engine long block is assembled with a natural finish cam cover, natural finish lifter block, automatic advance distributor and solid lifters. Each long block is pre-run and tested for proper oil pump pressure!!

 Each Knucklehead Engine long block is assembled with S&S crankcases, Sifton oil pump, S&S 45/8” flywheels, Timken main bearing, Sifton Knucklehead lighting cam, matched pinion gear, Torrington cam needle bearing & Torrington main pinion bearing. Cylinders are Motor Shop Ready Brand pre-fitted with forged 8.25:1 pistons.  Cylinder heads are Motor Shop Ready brand fitted with Sifton valves, springs and collars. Heads feature stock intake & exhaust ports. $8,275.00

Free Shipping On These Replica Harley Davidson Knucklehead Engines Within The Continental US (excluding Alaska, Hawaii & Puerto Rico)!!

 
Shovelhead Engine Generator Shortblock  Shovelhead/Panhead/Knucklehead Engine Shortblock!!

Shipped fully assembled as shown. Both 80” units feature an S&S Crankcase, Sifton Oil Pump/Breather assembly, stock stroke flywheel, Timken Bearings, stock cam properly installed with a matched pinion and cam gear with Torrington bearing. Assembly is supplied with a natural cover and chrome lifter blocks are fitted with standard tappets which will accept a hydraulic lifter unit or solid conversion kit not included!!

This Engine Shortblock Is Available  As A 1941-1947 74" Knucklehead, OR The 1956-1962 74" Panhead, OR A 1963-1964 74" Panhead, OR A 1963-1964 80" Panhead, OR A 1965 74" Panhead, OR A 1965 80" Panhead, OR, A 1966-69 74" Shovelhead!! $3,099.00-$3,149.00 On The Panhead & Shovelhead Engine Short-blocks, $4,149.00 On The Knucklehead Engine Shortblock, Priced Shipped To Your Door!!
Make Your Year Model  Panhead, Shovelhead, or Knucklehead Engine Shortblock Selection In The Saddlebag!!

Replica Harley Davidson Knucklehead Engine Cases!!
These Replica Harley Davidson Knucklehead Engine Case Sets For Replacement On 1941-1947 Knucklehead Engines!!

Replica Harley Davidson Knucklehead Engine Case Sets!!

 “Shop Ready” Replica Case Sets feature original style fitments including, left side number boss, which is left blank for original numbers with manufacturer’s numbers on right underside.  Sets have generator strap mount tab and relay boss as required but have thicker left side case for added strength. Main bearing races are line lapped!!

These components are pre-installed:
• Cam Bushing or Bearing
• Left Case Race or Timken Assembly
• Idler Gear Stud
• Circuit Breaker Stud
• Oil Pump Drive Bushing
• Right Case Bushing
• Cylinder Base Studs
• Dowel Pins
• Case Bolt Set
• Tappet Oil Screen
• Breather Tube
• Drain and Timing Plug
$1,149 For The Replica Knucklehead Cases, $85.00 For The Bearing Cages & Roller Kits,  Priced Shipped To Your Door!!

Make Your Knucklehead Engine Cases & Cages & Roller Kit Selection In The Saddlebag!!

<<Knucklehead>> << Panhead >> << Shovelhead >> << Evolution >>

Replica Harley Knucklehead Engines

Knucklehead

Harley Davidson Disclaimer:
Harley Davidson, Knuckehead, - Are, Or Might Be  registered trademarks of the Harley Davidson Motorcycle Company. Any use of previous trademarks are purely for reference purposes and not intended as copyright infringement .  We Just Want To Sell Replica Harley Davidson Knucklehead Engines!!